top of page

BATTER APPLICATION EQUIPMENT

BATTER MIXERS

VCS

VCS BATTER MIXER

Models:

  • MP410-50: 50 Gallon

  • MP410-70: 70 Gallon

​​

Machine Features:

  • Ultrasonic in-line viscometer controlling a wide range of viscosities with extremely tight tolerances. No calibration required. CIP capable

  • Construction is all stainless steel frame with US standard fasteners, bearings, sprockets, belting and shafts with sanitary open frame design

  • Fully automated controls using an AB PLC & color touchscreen for 100% automated control of batter mixing and monitoring

  • Electrical control characteristics:

    • Automated start-up sequence for more consistent and quicker startups

    • Stainless steel sloped top NEMA 4X enclosures

    • Temperature monitoring in mix tank and supply water

    • Shut down feature that reduces batter waste as shutdown from approx. 65 gallons to as low as 5 gallons

    • Ethernet networking capability

  • All stainless steel viscosity pump and motor with direct drive

  • Stainless steel 2 HP mixer

  • Sanitary stainless steel water piping

  • Stainless steel feed pump and motor with direct drive are controlled using variable frequency drives for speed and flow control

  • Ergonomically designed low profile batter hopper available in standard 34” load height with 100 lb. capacity

  • Can produce batter with tolerances of less than one-third of a cup second, which equals 5-6 centipoise

  • Stainless sanitary piping 

  • Out-of-spec alarm system monitoring temperature and motor overloads

  • Perforated parts basket for all sanitary and pump parts

  • High efficiency, stainless steel mix tank w/cooling jacket on exterior of side and bottom of tank (180 PSI A.S.M.E. Certified/Stamped)

TCS

TCS BATTER MIXER

Models:

  • MP415-50: 50 Gallon

  • MP415-70: 70 Gallon​

Machine Features:

  • An ALL electric automated tempura batch mixing system with very precise mix accuracy and temperature control

  • Standards & guidelines to Food Safety & USDA requirements

  • Construction is all stainless steel frame and assembled using US standard food safety components

  • Capable of producing up to 660 gallons of tempura per hour or as little as 25 gallon per hour. The TCS can mix and pump a batch of tempura in 5 minutes or less.

  • High efficiency 50 or 70 gallon insulated tanks

  • Adjustable batch size that is 100% programmable

  • Electrical control characteristics:

    • Allen Bradley PLC and color touchscreen

    • Allen Bradley VFD’s on feed pump as well as mixer

    • Electronic water meter & plc meters water automatically in tenths of a gallon

    • Automated startup sequence for added consistency

    • Stainless Steel sloped top NEMA 4X enclosures

    • Temperature control and monitoring in mix tank

    • Ethernet networking capability

    • 100% automated control of batter mixing

  • All stainless steel Unibloc PD feed pump with variable speed

  • All stainless steel direct driven mixer with precise speed control of a VFD

  • All stainless steel water and sanitary piping

  • All stainless steel jacketed & insulated mix tank with jackets on side & bottom of tank (180 psi ASME Certified & Stamped)

  • Ergonomically designed low profile hopper with 150lb capacity

  • Self-diagnostics for alarms, temperatures and motor O.L.

  • Perforated parts basket for all sanitary and pump parts during disassembly

BATTER APPLICATORS

Batter Applicator

BATTER APPLICATOR

Model Options:

  • Electric or Hydraulic

  • 40” or 52”

  • Top Submerge or Waterfall

  • Passive or Active batter filtering (drain box or Continuous Batter Filter)

 

Machine Features:

  • Construction is all stainless steel frame with US Standard fasteners, bearings, sprockets, belting and shafts with sanitary open frame design

  • Designed for 40” and 52” usable belt width

  • Operating controls are ergonomically designed

  • Stainless steel centrifugal pump and motor

  • 3/8” pitch wire belt with roller discharge

  • Locking gas cylinder lift system for ease of sanitation and safety

  • Top submerge conveyor with separate direct drive for ease of cleaning and maintenance

  • Includes one top blower tube above and below product belt for tie into plant central blower system

  • Standard 12” infeed conveyor with mesh belt and separate drive

  • Machine Options:

    • Heavy-duty batter transfer pump

    • Level glide waterfall application includes four-curtain overflow with 1” dip pan and replaces top submerge conveyor and batter dip

    • Continuous Batter Filter actively filters batter before returning to Batter Mixer.  Replaces the standard Drain Box.

bottom of page